b'Y-TYPE STRAINERY-TYPE STEEL STRAINERMODEL SLY8211/ 8223DIMENSIONS (MM) DIMENSIONS (MM)SL-Y8223 - 600/800 CLASS SL-Y8211 - 150, 600, 800 & 1000 PSISize Blow-Off* N.P.T.Size 600 to 1000 PSIL (mm) H (mm) (inch) Weight (Kg)mm inch mm inch L (mm) H (mm)15 1/2 74 60 3/8 0.45 8 1/4 65 5120 3/4 95 73 3/8 0.68 10 3/8 65 5125 1 115 94 1/2 1.02 15 1/2 65 5132 1-1/4 125 98 1/2 1.82 20 3/4 80 6040 1-1/2 141 122 3/4 2.73 25 1 85/108 50/10550 2 176 154 3/4 4.66 32 1-1/4 99 5565 2-1/2 1-1/4 5.91 40 1-1/2 111/149 59/14280 3 1-1/4 8.18 50 2 140/179 73/188Indicative only, refer to as-built drawing. 65 2-1/2 185/174 91/155DIMENSIONS (MM) 80 3 206/496 110/180SL-Y8223-1500 CLASS 100 4 238 163Indicative only, refer to as-built drawing.Size Blow-Off N.P.T. L (mm) H (mm) (Inch) Weight (Kg)mm inch DIMENSIONS (MM)15 1/2 99.22 76.2 1/4 2.73 SL-Y8223-2500 CLASS20 3/4 107.95 92.08 1/4 2.7325 1 127 104.78 1/4 2.73 Size L H Blow-Off N.P.T.Weight32 1-1/4 212 178 3/4 7.73 mm inch (mm) (mm) (Inch) (Kg)40 1-1/2 212 177.8 3/4 7.73 15 1/2 99 76 1/4 2.7350 2 236.54 187.33 3/4 13.64 20 3/4 107 92 1/4 2.73Indicative only, refer to as-built drawing. 25NB ~ 50NB refer to as-built drawing.PRESSURE/TEMPERATUREModel Max Cold WorkingMax Working Pressure SteamPressure W.O.G. 1 40 PSI @ 300C (*1)SL-Y8211-150 PSI 150 PSI WOG (CWP)130 PSI @ 200C440 PSI @ 300C (*1)SL-Y8211-600 PSI 600 PSI WOG (CWP)460 PSI @ 200C460 PSI @ 300C (*1)SL-Y821-800 PSI 800 PSI WOG (CWP)500 PSI @ 200C465 PSI @ 300C (*1)SL-Y821-1000 PSI 1000 PSI WOG (CWP)500 PSI @ 200CSL-Y8223-600 Class 1480 PSI WOG (CWP) Refer ASME B16.34SL-Y8223-800 Class 2020 PSI WOG (CWP) Refer ASME B16.34SL-Y8223-1500 Class 3700 PSI WOG (CWP)Refer ASME B16.34SL-Y8223-2500 Class 6000 PSI WOG (CWP) Refer ASME B16.34All strainers are tested to 1.5 times the maximum working pressure (pressure limitations apply at maximum temperature) (*1) If for the steam/high temperature application you must advise so we can use high temp gasket.SCREEN SPECIFICATIONSNominal Size Perforation CD1 Pitch of Holes (P) Screen Thickness Approx. Mesh Size % Open Area Micron Count25mm to 50mm .8 mm 2.0 mm 0.4 mm #20 36% 84165mm to 80mm 1.14 mm 3.5 mm 0.5 mm #5 48% 2000-3000Examples only.We can also supply special mesh as low as 37 microns for very low pressure/flow applications.14 FLOWTURN - Strainers and Sight Glasses'